E) Setting / Activating The Alarm Time; F) Product Settings - Conrad 372884 Operation Instructions Manual

e) Setting / activating the alarm time

You can defi ne fi ve alarm times. In addition, you can defi ne if the alarm time is to be activated daily,
Mondays to Fridays or only on a specifi c weekday.
• The pulse watch must display the main display of one of the four modes (Compass, Time, Workout,
Navigation mode). It must not display a sub-menu for settings.
• Hold down the 'MODE' (2) key for 3 seconds until 'Menu:' is displayed.
With the 'ST. / STP' (3) and 'LAP / RESET' (5) keys select the individual menu items,
with the 'VIEW' (4) key you can go to the respective sub-menus or change the status
of the respective setting. With the 'MODE' (3) key, return to the previous menu.
• Select the 'Menu:' → 'Settings' → 'Alarms'.
• Press the 'VIEW' (4) key to select Alarm 1 - 5, Hour, Minute, Alarm on or off and the weekday. With
the 'ST. / STP' (3) and 'LAP / RESET' (5) keys, the corresponding values can change.
Activating the alarm time
• In Time mode, press the 'VIEW' (4) key thrice.
• Press the 'ST. / STP' (3) key to select one of the fi ve alarm times.
• Press the 'LAP / RESET' (5) key to activate the alarm time.
As soon as the alarm time is reached, you will hear an alarm tone and see an alarm
symbol. Press any key to delete the alarm signal.

f) Product settings

• The pulse watch must display the main display of one of the four modes (Compass, Time, Workout,
Navigation mode). It must not display a sub-menu for settings.
• Hold down the 'MODE' (2) key for 3 seconds until 'Menu:' is displayed.
With the 'ST. / STP' (3) and 'LAP / RESET' (5) keys select the individual menu items,
with the 'VIEW' (4) key you can go to the respective sub-menus or change the status
of the respective setting. With the 'MODE' (3) key, return to the previous menu.
60