Conrad 372884 Operation Instructions Manual page 65

Tone settings
Select the 'Menu:' → 'Settings' → 'System' → 'Sound'. Here you have the following setting options:
'Key Tones'
Press the 'VIEW' (4) key to switch on or off the key sounds.
'Chime'
Press the 'VIEW' (4) key to switch on or off an alarm tome for every complete hour.
Contrast
Select the 'Menu:' → 'Settings' → 'System' → 'Contrast' to set the contrast:
Press the 'ST. / STP' (3) and 'LAP / RESET' (5) keys to change between the 16 contrast levels.
Measurement units
Select the 'Menu:' → 'Settings' → 'System' → 'Unit'. Here you have the following setting options:
'General'
Press the 'ST. / STP' (3) and 'LAP / RESET' (5) keys to change between Kilogram / Meter / Kilometer
and Pound / Foot / Miles.
'LatLong'
Press the 'ST. / STP' (3) and 'LAP / RESET' (5) keys to change display of the position data between
Degree / Minutes / Seconds and decimals.
Restoring factory settings
Select the 'Menu:' → 'Settings' → 'System' → 'SysReset' to restore the factory settings.
When you restore the factory settings, all the changes you make too are deleted.
61