G) Selecting Way Points; H) Navigation Functions - Conrad 372884 Operation Instructions Manual

g) Selecting way points

You can display the direction to a saved way point in the main display of the Navigation mode. For
this purpose, proceed as follows:
• Press the 'MODE' (2) key until you are in Navigation mode.
• Press the 'VIEW' (4) key to display the current path.
• Press the 'ST. / STP' (3) and 'LAP / RESET' (5) keys to select a way point.
• Press the 'VIEW' (4) key to return to the Navigation mode. The direction indicator now points in the
direction of the way point.

h) Navigation functions

To select the navigation functions, proceed as follows:
• The pulse watch must display the main display of one of the four modes (Compass, Time, Workout,
Navigation mode). It must not display a sub-menu for settings.
• Hold down the 'MODE' (2) key for 3 seconds until 'Menu:' is displayed.
With the 'ST. / STP' (3) and 'LAP / RESET' (5) keys select the individual menu items,
with the 'VIEW' (4) key you can go to the respective sub-menus or change the status
of the respective setting. With the 'MODE' (3) key, return to the previous menu.
• Select 'Menu:' → 'Navigation' → 'Nav Mode'. Here you have the following setting options:
'WayPoint'
Press the 'VIEW' (4) key to activate the next way point.
'Forward'
Press the 'VIEW' (4) key to use the current path forwards up to the previous way point.
'Backward'
Press the 'VIEW' (4) key to use the current path backwards up to the previous way point.
65