Memory Position; Gps Master' Software - Conrad 372884 Operation Instructions Manual

16. Memory position

To check how much memory is left in the pulse watch, proceed as follows:
• The pulse watch must display the main display of one of the four modes (Compass, Time, Workout,
Navigation mode). It must not display a sub-menu for settings.
• Hold down the 'MODE' (2) key for 3 seconds until 'Menu:' is displayed.
With the 'ST. / STP' (3) and 'LAP / RESET' (5) keys select the individual menu items,
with the 'VIEW' (4) key you can go to the respective sub-menus or change the status
of the respective setting. With the 'MODE' (3) key, return to the previous menu.
• Select the 'Menu:' → 'Settings' → 'Menu' → 'Memory'.
If the memory is full, you must delete some old workout data before you can save new workout data.

17. 'GPS MASTER' software

You can observe and evaluate the data saved in the pulse watch (workout data, paths, way points)
with the 'GPS MASTER' software. The connection between the pulse watch and the computer is done
via the USB cable with the contact clip.
The way points and paths can be shown and observed in Goggle Earth views. The relevant workout
data is displayed in neatly arranged diagrams.
74