4. Hardware Configurations
Installation Conditions and Installation Rules
■
Installation Order
This section describes the standard installation rules for host interfaces.
•
For the ETERNUS AF150 S3/AF250 S3
Install the host interfaces in CA#0 first, and then install CA#1.
The configuration is the same for Controller 0 (CM#0) and Controller 1 (CM#1).
Figure 119
Host Interface Installation Diagram (ETERNUS AF150 S3/AF250 S3 [Two-Port CA Type])
Port
#0
CA#0
For the ETERNUS AF650 S3
•
For the ETERNUS AF650 S3, install the host interfaces in CA#0, CA#1, CA#2, and CA#3 in ascending order
according to the priority order.
The configuration is the same for Controller 0 (CM#0) and Controller 1 (CM#1).
Figure 120
Host Interface Installation Diagram (ETERNUS AF650 S3)
Port
Port
Port
#1
#0
#1
CA#1
Additional
installation
Controller 0 (CM#0)
Rear view of a controller enclosure
CA#2
CA#0
Controller 1 (CM#1)
CA#2
CA#0
Controller 0 (CM#0)
Rear view of a controller enclosure
Port
Port
Port
#0
#1
#0
CA#0
Controller 1 (CM#1)
CA#3
CA#1
CA#3
CA#1
176
Port
#1
CA#1
Additional
installation
Design Guide