Fujitsu ETERNUS AF S3 Series Design Manual page 144

3. Connection Configuration
LAN Connection
Usage
REMCS
(remote support)
AIS Connect (remote
support)
Syslog
(event notification and
audit log sending)
RADIUS
ping
KMIP (key
management)
ECD (*4)
¡: Available / △: Available for some functions / ´: Not available
*1: Only the following functions are available:
• Checking the ETERNUS AF status
Switching the Master CM
•
*2: Can be changed.
*3: The MNT port or the RMT port will be used.
*4: Used with the Remote Installation function. ETERNUS Connection Detecting tool (ECD) is a Windows application for collecting the
network setting information of the ETERNUS AF.
For details on the port numbers for the ETERNUS SF Software, refer to the manual of each Storage Foundation
Software ETERNUS SF.
Port
Protocol tcp / udp
number
smtp tcp 25 (*2)
(client)
pop3 tcp 110 (*2)
(client)
http tcp 80 or 8080
(client) (*2)
https tcp 443
(client)
Syslog udp 514 (*2)
Radius udp 1812 (*2)
ICMP — —
SSL tcp 5696 (*2)
Unique udp 9686
protocol
Master CM
Direction
MNT RMT
to ¡ (*3) ¡ (*3)
to
¡ (*3) ¡ (*3)
to ¡ (*3) ¡ (*3)
to ¡ (*3) ¡ (*3)
to ¡ (*3) ¡ (*3)
to ¡ (*3) ¡ (*3)
from
¡ (*3) ¡ (*3)
to ¡ (*3) ¡ (*3)
from ´
¡
144
Slave CM
Remarks
MNT RMT
´ ´
Used for
failure
notificatio
n, etc.
´ ´ Used for
SMTP
authentica
tion
´ ´
Used for
firmware
download,
etc.
´ ´
—
´ ´
—
´ ´
—
´ ´ —
´ ´
—
´ ´ —
Design Guide