Table of Contents
Advertisement
Available languages
Available languages
CÓDIGOS DE ERROR
Los códigos de error aparecen en el área de visualización de la
temperatura del panel de control.
Código
Descripción del error
de error
EH
Fallo del sensor de humedad
F5
La máquina de hielo del refrigerador no enciende
F4
Fallo del sensor de la máquina de hielo del refrigerador
CC
Fallo del sensor de descongelación en el compartimento de
la máquina de hielo
C9
Fallo del sensor del compartimento de la máquina de hielo
CA
Fallo de comunicación entre la placa principal y la placa de la
máquina de hielo
F6
Fallo de inicialización de la máquina de hielo del refrigerador
E0
Fallo de inicialización de la máquina de hielo del congelador
E1
Fallo del sensor de temperatura del compartimento de
refrigeración
E2
Fallo del sensor de temperatura del compartimento de
congelación
E3
Fallo del sensor del cajón flexible PerfectChill
E4
Fallo del sensor de escarcha del compartimento de
refrigeración
E5
Fallo del sensor de escarcha del compartimento de
congelación
E6
Fallo de comunicación entre la placa principal y la placa de
visualización
E7
Fallo del sensor de temperatura ambiental
EE
Fallo del sensor de la máquina de hielo del congelador
EP
La máquina de hielo del congelador no enciende
47
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the MRQ22D7AST and is the answer not in the manual?
Questions and answers
My control panel on the drawer has gone out. Due to this, neither ice maker is working and we can't adjust temps on anything. Is there a way to reset this? We have tried unplugging the fridge for 30 seconds. What else can I try? If I have to replace the control panel on the drawer, how do I do that?
How do you correct a E6 code
The E6 error code on the Midea MRQ22D7AST refrigerator indicates a communication failure between the main board and the display board. To fix this issue, try the following steps:
1. Power Cycle the Refrigerator – Unplug the refrigerator from the power source for a few minutes, then plug it back in and check if the error clears.
2. Check Connections – Ensure that the wiring connections between the main board and the display board are secure and undamaged.
3. Reset the Control Panel – If the refrigerator has a reset function, use it to restart the system.
4. Contact Customer Support – If the error persists, contact Midea customer service or a qualified technician for further diagnosis and repair.
If the refrigerator is under warranty, consider requesting service from an authorized Midea technician.
This answer is automatically generated
We are seeing a EO on the display panel. We hold hold the control lock for seconds and it goes away. However it returns. Not sure what the EO means and how to get rid of it.
The E0 error code on the Midea MRQ22D7AST display panel indicates a freezer ice maker initialization failure. To resolve this issue, try the following steps:
1. Power Cycle the Appliance – Unplug the refrigerator for a few minutes and then plug it back in to reset the system.
2. Check the Ice Maker – Ensure the ice maker is properly connected and not obstructed.
3. Inspect for Ice Blockages – Remove any ice buildup that may be preventing the ice maker from initializing.
4. Verify Water Supply – Ensure the water line is connected and supplying water to the ice maker.
5. Contact Support – If the issue persists, contact Midea customer service or an authorized technician for further assistance.
If the error continues, professional service may be required.
This answer is automatically generated