MÁQUINA DE HIELO
Máquina de hielo para refrigerador
Presione el botón REF-ICE
hielo del compartimiento de refrigeración. Cuando la máquina de hielo del
refrigerador esté encendida, el control se iluminará.
Máquina de hielo para congelador
Presione el botón FRZ-ICE
hielo del compartimiento de congelación. Cuando la máquina de hielo del
congelador esté encendida, el control se iluminará.
Depósito de hielo del refrigerador
El depósito de hielo del compartimento de refrigeración es extraíble para
limpiarlo o vaciarlo cuando se necesita una gran cantidad de cubitos de
hielo.
Después de vaciarlo y/o limpiarlo, coloque nuevamente el depósito de
hielo inmediatamente. La máquina de hielo seguirá produciendo hielo y
los cubos caerán en el depósito de fabricación de hielo si el depósito de
hielo no está instalado correctamente.
Para extraer el depósito de hielo:
1.
Abra la puerta izquierda del refrigerador tanto como sea posible.
2.
Agarre el asa del depósito de hielo y extraiga el depósito del
compartimento.
a
Para volver a colocar el depósito de hielo:
1.
Retire los cubitos de hielo que puedan haber caído en el
compartimento de hielo.
2.
Deslice el depósito de hielo en el compartimento.
para ENCENDER/APAGAR la máquina de
para ENCENDER/PAGAR la máquina de
a
Depósito
de hielo
29
Need help?
Do you have a question about the MRQ22D7AST and is the answer not in the manual?
Questions and answers
My control panel on the drawer has gone out. Due to this, neither ice maker is working and we can't adjust temps on anything. Is there a way to reset this? We have tried unplugging the fridge for 30 seconds. What else can I try? If I have to replace the control panel on the drawer, how do I do that?
How do you correct a E6 code
The E6 error code on the Midea MRQ22D7AST refrigerator indicates a communication failure between the main board and the display board. To fix this issue, try the following steps:
1. Power Cycle the Refrigerator – Unplug the refrigerator from the power source for a few minutes, then plug it back in and check if the error clears.
2. Check Connections – Ensure that the wiring connections between the main board and the display board are secure and undamaged.
3. Reset the Control Panel – If the refrigerator has a reset function, use it to restart the system.
4. Contact Customer Support – If the error persists, contact Midea customer service or a qualified technician for further diagnosis and repair.
If the refrigerator is under warranty, consider requesting service from an authorized Midea technician.
This answer is automatically generated
We are seeing a EO on the display panel. We hold hold the control lock for seconds and it goes away. However it returns. Not sure what the EO means and how to get rid of it.
The E0 error code on the Midea MRQ22D7AST display panel indicates a freezer ice maker initialization failure. To resolve this issue, try the following steps:
1. Power Cycle the Appliance – Unplug the refrigerator for a few minutes and then plug it back in to reset the system.
2. Check the Ice Maker – Ensure the ice maker is properly connected and not obstructed.
3. Inspect for Ice Blockages – Remove any ice buildup that may be preventing the ice maker from initializing.
4. Verify Water Supply – Ensure the water line is connected and supplying water to the ice maker.
5. Contact Support – If the issue persists, contact Midea customer service or an authorized technician for further assistance.
If the error continues, professional service may be required.
This answer is automatically generated