Table of Contents
Advertisement
Available languages
Available languages
PROBLÈME
Le compresseur
s'active et
se désactive
fréquemment
Le réfrigérateur
dégage une
odeur
CAUSE POSSIBLE
La température de la
pièce est plus élevée
qu'en temps normal.
Une grande quantité
d'aliments vient
d'être ajoutée au
réfrigérateur.
La porte n'est pas
fermée correctement
ou a été ouverte trop
souvent.
Le réfrigérateur a été
débranché sur une
période prolongée.
La température
n'a pas été réglée
correctement.
Le réfrigérateur a
besoin d'être nettoyé.
Les aliments mal
emballés dégagent
une odeur.
SOLUTION
Ceci est normal.
Allouez assez de temps pour
permettre à ces nouveaux
aliments de se refroidir, puis
vérifiez de nouveau.
Vérifiez le joint d'étanchéité
de la porte et la disposition
des aliments, et assurez-
vous que la porte se referme
correctement.
Allouez 4 heures avant
d'ajouter des aliments pour
permettre au réfrigérateur de
se refroidir.
Réglez la température au
niveau approprié.
Nettoyez le réfrigérateur.
Consultez "Nettoyage."
Emballez les aliments de façon
adéquate avant de les placer
dans le réfrigérateur.
41
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the MRQ22D7AST and is the answer not in the manual?
Questions and answers
My control panel on the drawer has gone out. Due to this, neither ice maker is working and we can't adjust temps on anything. Is there a way to reset this? We have tried unplugging the fridge for 30 seconds. What else can I try? If I have to replace the control panel on the drawer, how do I do that?
How do you correct a E6 code
The E6 error code on the Midea MRQ22D7AST refrigerator indicates a communication failure between the main board and the display board. To fix this issue, try the following steps:
1. Power Cycle the Refrigerator – Unplug the refrigerator from the power source for a few minutes, then plug it back in and check if the error clears.
2. Check Connections – Ensure that the wiring connections between the main board and the display board are secure and undamaged.
3. Reset the Control Panel – If the refrigerator has a reset function, use it to restart the system.
4. Contact Customer Support – If the error persists, contact Midea customer service or a qualified technician for further diagnosis and repair.
If the refrigerator is under warranty, consider requesting service from an authorized Midea technician.
This answer is automatically generated
We are seeing a EO on the display panel. We hold hold the control lock for seconds and it goes away. However it returns. Not sure what the EO means and how to get rid of it.
The E0 error code on the Midea MRQ22D7AST display panel indicates a freezer ice maker initialization failure. To resolve this issue, try the following steps:
1. Power Cycle the Appliance – Unplug the refrigerator for a few minutes and then plug it back in to reset the system.
2. Check the Ice Maker – Ensure the ice maker is properly connected and not obstructed.
3. Inspect for Ice Blockages – Remove any ice buildup that may be preventing the ice maker from initializing.
4. Verify Water Supply – Ensure the water line is connected and supplying water to the ice maker.
5. Contact Support – If the issue persists, contact Midea customer service or an authorized technician for further assistance.
If the error continues, professional service may be required.
This answer is automatically generated