LIMPIEZA
1.
Lave el interior del refrigerador con un paño suave humedecido con
una solución de bicarbonato de sodio (2 cucharadas de bicarbonato
de sodio mezclado con 1 litro de agua tibia).
2.
Usando un paño suave, seque bien todas las superficies.
USO DEL REFRIGERADOR
GENERAL
•
La vida de almacenamiento de los alimentos congelados varía y no se
debe exceder el tiempo de almacenamiento recomendado.
•
Coloque los alimentos congelados en el refrigerador lo más rápido
posible después de la compra.
•
No vuelva a congelar alimentos congelados si se han descongelado
por completo.
ADVERTENCIA
Peligro de choque eléctrico
•
Enchufe en un tomacorriente de 3 clavijas con conexión a tierra.
•
No quite la clavija de conexión a tierra del enchufe del cable de
alimentación.
•
No use un adaptador.
•
No utilice un cable de extensión.
•
El incumplimiento de estas instrucciones puede provocar la muerte,
incendio o descarga eléctrica.
1.
Enchufe el refrigerador en un tomacorriente de 3 clavijas con conexión
a tierra
2.
Espere 30 minutos y luego abra la puerta del refrigerador para
determinar si el refrigerador está funcionando correctamente.
3.
Coloque los artículos en los compartimentos del refrigerador y del
congelador.
CONSEJOS PARA AHORRAR ENERGÍA
•
Deje que los alimentos calientes se enfríen a temperatura ambiente
antes de colocarlos en el refrigerador. Los alimentos que se congelan
muy lentamente pueden perder calidad o echarse a perder.
•
La sobrecarga del refrigerador obliga al compresor a funcionar durante
más tiempo.
•
Envuelva los alimentos adecuadamente y seque los recipientes antes
de colocarlos en el refrigerador. Esto reduce la acumulación de
escarcha dentro del refrigerador.
25
Need help?
Do you have a question about the MRQ22D7AST and is the answer not in the manual?
Questions and answers
My control panel on the drawer has gone out. Due to this, neither ice maker is working and we can't adjust temps on anything. Is there a way to reset this? We have tried unplugging the fridge for 30 seconds. What else can I try? If I have to replace the control panel on the drawer, how do I do that?
How do you correct a E6 code
The E6 error code on the Midea MRQ22D7AST refrigerator indicates a communication failure between the main board and the display board. To fix this issue, try the following steps:
1. Power Cycle the Refrigerator – Unplug the refrigerator from the power source for a few minutes, then plug it back in and check if the error clears.
2. Check Connections – Ensure that the wiring connections between the main board and the display board are secure and undamaged.
3. Reset the Control Panel – If the refrigerator has a reset function, use it to restart the system.
4. Contact Customer Support – If the error persists, contact Midea customer service or a qualified technician for further diagnosis and repair.
If the refrigerator is under warranty, consider requesting service from an authorized Midea technician.
This answer is automatically generated
We are seeing a EO on the display panel. We hold hold the control lock for seconds and it goes away. However it returns. Not sure what the EO means and how to get rid of it.
The E0 error code on the Midea MRQ22D7AST display panel indicates a freezer ice maker initialization failure. To resolve this issue, try the following steps:
1. Power Cycle the Appliance – Unplug the refrigerator for a few minutes and then plug it back in to reset the system.
2. Check the Ice Maker – Ensure the ice maker is properly connected and not obstructed.
3. Inspect for Ice Blockages – Remove any ice buildup that may be preventing the ice maker from initializing.
4. Verify Water Supply – Ensure the water line is connected and supplying water to the ice maker.
5. Contact Support – If the issue persists, contact Midea customer service or an authorized technician for further assistance.
If the error continues, professional service may be required.
This answer is automatically generated