Helpful Documents; Design And Integration Files; Equipment Needed; Getting Started - Analog Devices AD9653 User Manual

Features
Full featured evaluation board for the
SPI interface for setup and control
External, on-board oscillator, or
Balun/transformer or amplifier input drive option
On-board LDO regulator needing a single external 6 V, 2 A dc supply
VisualAnalog® and SPI controller software interfaces

Helpful Documents

AD9653, AD9253 or
High speed ADC FIFO evaluation kit (HSC-ADC-EVALCZ)
AN-905 Application
AN-878 Application
AN-877 Application
AN-835 Application

Design and Integration Files

Schematics, layout files, bill of materials

Equipment Needed

Analog signal source and antialiasing filter
Sample clock source (if not using the on-board oscillator)
2 switching power supplies (6.0 V, 2.5 A), CUI EPS060250UH-PHP-SZ provided
PC running Windows®
USB 2.0 port
AD9653-125EBZ, AD9253-125EBZ
HSC-ADC-EVALCZ FPGA-based data capture kit

Getting Started

This section provides quick start procedures for using the AD9653-125EBZ,
AD9633-125EBZ board. Both the default and optional settings are described.
AD9653/AD9253/AD9633
AD9517
AD9633 data sheet
Note, VisualAnalog Converter Evaluation Tool Version 1.0 User Manual
Note, High Speed ADC SPI Control Software
Note, Interfacing to High Speed ADCs via SPI
Note, Understanding ADC Testing and Evaluation
or AD9633-125EBZ
Rev 13 May 2013 17:57 | Page 2
clocking option
board
AD9253-125EBZ or