Quick BTR1806512 User Manual page 23

Fig. 4
Fig. 5
Fig. 6
SUPPORT
HULL
Assemble the thruster to support, now integral with the hull, using the provided bolts and screws, verifying the correct
positioning of the o-ring in the support.
RETRACTABLE THRUSTER BTR185 - IT GB - REV004B
Realise the opening in the hull for tunnel passage, by cutting the hull along
the outlined perimeter.
Align the support to the pre-established position and resin it, weld it in
case of aluminium or steel, according to the techniques identified as most
suitable for the type of hull construction.
INSTALLATION
THRUSTER
BOLT
WASHER
O-RING
WASHER
NUT
GB
23