Table of Contents
Advertisement
Keyboard Controls – Video Effects
SETTING BUTTON
This button is used to enter the HS-600 configuration and settings menus. The
menu options are displayed on the DVI-D based Multi-Image Preview output.
Press the up, down, left, or right arrow buttons to navigate the menu choices or
to change values. Use the ENTER button to confirm the current setting.
LOGO SETTING
PIP SETTING
LUMA KEY SETTING
These three buttons provide a short cut to the required menu set up which is
then displayed on the Multi-Viewer output.
MOSAIC
Press the MOSAIC Key to activate the MOSAIC Effect.
The MOSAIC effect can be set to six different levels using the BDR Keys. You
will see the effect change in the PST window.
PAINT
Press the PAINT Key to activate the Paint Effect.
The Paint effect can be set to six different levels using the BDR Keys. You will
see the effect in the PST window.
B/W
Press the B/W Key to activate the black and white effect.
USER 1 / USER 2
Press the USER 1 Key to select PIP1 BG/PIP source.
Press the USER 2 Key to select PIP2 BG/PIP source.
BG CLR
You can select BG CLR if you want to display a background screen. The
background can be set to one of eight different colours, colour bars or framing
lines. The Multi-Viewer Status Display will indicate the active background. The
background can be changed using the BG Colour Key.
BDR CLR
A wipe can be given a coloured edge or border. The border can be one of three
widths, and one of eight colours.
The Border Width and Colour are indicated in the Multi-Image Status Display.
You can set the Border width by repeatedly pressing the BDR Key - The Status
Display will show the following options:
BORDER =
BORDER = N "Color"
BORDER = M "Color"
BORDER = W "Color"
You can set the Border Colour by repeatedly pressing the BDR CLR Key - The
Status Display will show the following options in sequence:
BLACK - BLUE - RED - MAGENTA - GREEN - CYAN - YELLOW - WHITE
No Border
Narrow Border
Medium Border
Wide Border
15
Advertisement
Table of Contents
