Recommendations; Torques Specifications; Suspension Forks; Carbon - Lapierre 3 FPS2 X-Control Owner's Manual

certain models of tires are designed to rotate in a specific direction. Always respect the correct direction if
this is the case, which will be indicated on the side of the tire.

3 RECOMMENDATIONS

3. 1 TORqUE SPECIFICATIONS
- classic stem = 20 Nm
- Handlebars on a classic stem = 25 Nm
- threadless headset = 10 Nm on the pivot and 5 Nm on the handlebars
- brake cables = 6-8 Nm
- brake pads = 6-8 Nm
- brake levers = 6-8 Nm
- Rear derailleur = 8-10 Nm
- front derailleur = 5-6 Nm
- wheelnuts = 20 Nm
- Saddle chariot = 15 Nm

3.2 SUSPENSION FORkS

Your suspension fork requires specific, precise maintenance that may vary depending on the fork.
imperative that you read the manufacturer's notice that is delivered with your bike. due to the impact and the
shocks that suspension forks absorb, it is important to clean the stanchions and inspect the joints after each
use. Please refer to the manufacturer's notice for information regarding how often you should change or add
oil. Only a specialist who has the proper tools should perform these operations.
III - SPECIFIC MODELS

1 CARBON

Our carbon frames are the result of long hours of research and development, and owning one requires certain
maintenance procedures that will prolong the life of your bike and assure optimal performance.
- Pay close attention to your bike, listening for any strange noises and visually inspecting the frame and parts
on a regular basis.
- Perform regular tune-ups:
- Periodically visit your authorized Lapierre dealer so he can inspect your bike.
II - SETTINgS
It is
SETTINgS - 11