Conventions; Fluke Met/Cal Procedures; Table 1 Conventions - Agilent Technologies 6000 Series Service Manual

Conventions

Fluke MET/CAL Procedures

N O T E
6000 Series Oscilloscopes Service Guide
The following conventions will be used when referring to
oscilloscope models throughout this chapter.
Table 1 Conventions
Models
MSO/DSO6012A, MSO/DSO6014A, DSO6014L
MSO/DSO6032A, MSO/DSO6034A
MSO/DSO6052A, MSO/DSO6054A, DSO6054L
MSO/DSO6102A, MSO/DSO6104A, DSO6104L
Fluke MET/CAL procedures are available for the 6000A Series
oscilloscopes.
The MET/CAL badge with "PROCEDURES AVAILABLE"
signifies that Fluke has created Warranted MET/CAL
procedures to verify the performance of this instrument using
MET/CAL metrology software. These procedures can be
obtained from Fluke. Please see http://www.fluke.com and
search for MET/CAL for more information.
Please Note: Agilent Technologies, Inc. provides this link for the
convenience of its customers and does not warrant the suitability or
performance of the software.
Testing Performance
Referred to as:
100 MHz Models
300 MHz Models
500 MHz Models
1 GHz Models
2
27