Diagram Conventions; Description - Agilent Technologies 8960 Series Reference Manual

Diagram Conventions

Diagram Conventions

Description

AFGenerator
:FREQuency
Root Element
:VOLTage
See Complex Command
Description below.
Blue indicates a hypertext
link to the command's
description table.
SETup:<measurement>
See Identifier Description
below.
Diagram Description
Statement elements are connected by lines. Each line can be followed in only one direction, as indicated by the
arrow at the end of the line. Any combination of statement elements that can be generated by starting at the
Root Element and following the line the direction of the arrow is syntactically correct. The drawings show
the proper use of spaces. Where spaces are required they are indicated by <sp>, otherwise no spaces are
allowed between statement elements.
248
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_syntax_book_diagr_convent.fm
Root
Element
Node
[:SAMPlitude]
:AMPLitude
:STATe
:CONTinuous
[:SELected]
:DIGital136
:TA136
:GSM
:TA2000
:CDMA
<sp><num value>[HZ|KHZ|MHZ|GHZ]
Bold indicates
Space
default setting.
required.
?
Commands enclosed in square
brackets, [ ], are optional.
<sp><num value>[V|MV]
?
<sp><num value>[V|MV]
?
<sp>1|ON|0|OFF
? (returns 1|0)
<sp>1|ON|0|OFF
? (returns 1|0)
Vertical bar, |,
separates choices.