To Remove The Power Supply Shield; Figure 34. Release Hook Legs From Deck - Agilent Technologies 6000 Series Service Manual

5 Replacing 6000A Assemblies

To remove the power supply shield

WA R N I N G
Hook legs
114
1 Perform the previous procedures:
"To remove the cabinet"
2 Pull the shield back to release the 4 side hook legs from the
deck.
Thin sheet metal parts may have sharp edges. Handle with care to avoid injury.
Pull back
Figure 34 Release hook legs from deck.
on page 94
Pull back
Slot in deck
6000 Series Oscilloscopes Service Guide
Hook leg
Hook leg