Figure 12 6000L Series Led Indicators - Agilent Technologies 6000 Series Service Manual

4 Troubleshooting
Power Power LAN
Switch Indicator Status
Indicator
76
• On 6000L Series models, press the power switch.
The Power indicator LED is green. The LAN indicator LED is
bi-color (green and/or red).
Shortly after pressing the power switch, the power
•
indicator and LAN indicator will illuminate.
Both will extinguish.
•
Both will illuminate again. If a LAN is connected, the LAN
•
indicator will illuminate red. It will turn green when the
LAN is connected as it is configured. The amount of time it
takes the indicator to turn green depends on the network
and the oscilloscope's LAN configuration setup.
Reset
Switch
Figure 12 6000L Series LED indicators
4 If the lights illuminate, then the power supply is probably
working correctly.
5 Proceed to
page 77.
"To verify basic oscilloscope operation"
6000 Series Oscilloscopes Service Guide
on