Figure 23. Removing The Keyboard Assembly - Agilent Technologies 6000 Series Service Manual

Main Keypad Board
Encoder
6000 Series Oscilloscopes Service Guide
Latches (8)
Notch
Ribbon Cable
Figure 23 Removing the keyboard assembly
6 When reinstalling the boards:
a If you have a new main board assembly, you will need to
separate the softkey board from the main keypad board.
Using a needle nose pliers, carefully remove the two
process tabs.
Replacing 6000A Assemblies
Front Panel
Retaining Tabs
Softkey Board
and Slots
5
101