Table of Contents
Advertisement
Units operate at high temperatures. Allow the unit to cool at least 30 minutes before
performing any maintenance. Failure to do so could result in personal injury.
• Clean the lens using glass/plastic cleaner or mild soap and water mix. It is very important to
use a clean, soft cloth to avoid any scratching of the front lens. Never spray the cleaning fluid
directly onto the lens surface, but instead spray into clean cloth and then wipe the lens.
• Clean the light housing and arm(s) using mild soap and water mixture. Apply this mixture to
a clean cloth and wipe down the light-head and arm. Never spray the cleaning fluid directly
onto the light head or arm.
Do not use harsh cleaners, solvents, or detergents. Failure to do so could result in
equipment damage.
The VistOR PRO front lens is supplied with a protective hard coat to resist
scratching. Never use abrasive cleaners on front lens. Failure to do so could result in
equipment damage.
Do not expose the unit to excessive moisture. Failure to do so could result in
personal injury and/or property damage.
5368 KUHL ROAD ● ERIE, PENNSYLVANIA 16510 ● PHONE 814-899-4220 ● FAX 814-899-1410
Cleaning Instructions
A member of the Medical Illumination International Group
Section 6
P
age 65 of 85
Advertisement
Table of Contents
