Disassembly of the Track Mount before Installation
Keep the side panels and dress covers in a safe place to prevent damage until
reassembly.
• Remove the two stop pins P/N 1001076 and the #6 flat head screws P/N 0001155 holding
the pins in place from the track end with the end plate already removed. See figure 27.
Flat
Heads
Stop
Pins
Secure all screws and hardware until it is time for reassembly.
Disconnect the Molex connector attached to the trolley first.
• Slide the trolley assembly P/N 1000187 off the track. See figure 28.
5368 KUHL ROAD ● ERIE, PENNSYLVANIA 16510 ● PHONE 814-899-4220 ● FAX 814-899-1410
Trolley
Assembly
FIGURE 28: Trolley Assembly Removal
A member of the Medical Illumination International Group
FIGURE 27: Stop Pins Removal
Section 3
P
age 43 of 85