Table of Contents
Advertisement
VistOR SP and VistOR SPF Operation
Do not operate the unit front and /or rear lamps if the fan is not operating. Heat
buildup due to insufficient cooling will damage the equipment.
• Main Power Switch: On standard models, the toggle switch turns on power to the front lamp
and the fan. On models that have the optional fiber optic side lamp, the toggle switch turns
on the main power to the light head only. The fan will be on when the switch is on. The
individual lamps are controlled by the rocker switches located on the light housing.
• Position Adjustment: To move the light head and arm over the work area, firmly grasp the
sterilizable handle or the yoke located opposite the handle and bring the light head to the
required height. Adjust the angle of the light head by holding the handle and either pulling
forward or pushing backward to change the tilt. Rotating the light head can be done by
grasping the yoke or handle and moving it on its axis in a circular motion.
Sterilizable
Handle
FIGURE 32: VistOR SP Spotlight Standard Operation
5368 KUHL ROAD ● ERIE, PENNSYLVANIA 16510 ● PHONE 814-899-4220 ● FAX 814-899-1410
Yoke
A member of the Medical Illumination International Group
Section 4
Main Power
Switch
P
age 48 of 85
Advertisement
Table of Contents
