Disassembly of the Track Mount before Installation
• Take off the two side panels P/N 1001516 by removing the two (2) #10 wood screws at the
end of each panel. See figure 25.
Side
Panels
FIGURE 25: Side Panel Removal
• Loosen the three #8 set screws along each side of the track channel extrusion P/N 1001500
with the provided hex Allen wrench. Remove both dress covers P/N 1001515. See figure 26.
Set Screws (6)
5368 KUHL ROAD ● ERIE, PENNSYLVANIA 16510 ● PHONE 814-899-4220 ● FAX 814-899-1410
A member of the Medical Illumination International Group
Wood
Screws
FIGURE 26: Dress Cover Removal
Dress Covers
Section 3
P
age 42 of 85