• On/Off Toggle Switch: Switch energizes or de-energizes lamp.
• To position the light head and arm over the work area, firmly grasp the sterilizable handle or
the handle located on the side of the reflector housing and bring the light head or arm to the
desired location. Adjust the tilt of the light head by holding the sterilizable handle and rotating
forward or backward. The light head can revolve around the Yoke/Arm connector by
grasping the side handle or yoke and moving it in a circular motion.
Switch
Handle
Note: VistOR PRO light
head shown
FIGURE 31: VistOR PR and VistOR PRO Operation
5368 KUHL ROAD ● ERIE, PENNSYLVANIA 16510 ● PHONE 814-899-4220 ● FAX 814-899-1410
Section 4: Operating Instructions
VistOR PR and VistOR PRO Operation
Button
A member of the Medical Illumination International Group
Section 4
Yoke / Arm
Connector
Yoke
Sterilizable
Handle
P
age 47 of 85