Chuttle Track Ceiling Track Mount; Figure 19: Track Assembly And Components - Nuvo VISTOR Installation & Service Manual

Table of Contents

Advertisement

Installation and repair of this equipment should be performed by qualified personnel
only. Nuvo Inc. does not warranty any damage or injuries as a result of improper
installation.
Junction
Box

FIGURE 19: Track Assembly and Components

The shipping carton contains a fully assembled track mount and an installation and
service manual. Carefully remove the track from the shipping carton. Check the track for any
visible damage or missing components. The major components provided are the track
assembly, trolley assembly, and a junction box as shown on figure 19. Dual trolley Model No.
044012 will have two trolley assemblies and two wire harness cables. Prior to installation insure
that all components are present. Some disassembly of the unit is required before mounting it to
the ceiling.
Be careful not to damage any of the components when removing parts from the
shipping carton.
Important: Thoroughly check each box for parts that may be located in areas that
can be overlooked.
5368 KUHL ROAD ● ERIE, PENNSYLVANIA 16510 ● PHONE 814-899-4220 ● FAX 814-899-1410
Chuttle Track
Ceiling Track Mount
Trolley
Assembly
Cable
Carrier
GENERAL INFORMATION
A member of the Medical Illumination International Group
Section 3
Track
Assembly
P
age 38 of 85

Advertisement

Table of Contents
loading

Related Products for Nuvo VISTOR

Table of Contents