FIGURE 14: Floor Mount Dimensions
The shipping carton contains a light head assembly, arm assembly, floor base casting, two leg
assemblies, a hardware kit, and an Installation and Service Manual. A second carton contains the
upright pole assembly.
Prior to installation insure that all components are present.
When removing parts from the shipping carton, be careful not to damage the
components or break any glassware. Important: thoroughly check each box for parts that
may be located in areas that can be overlooked.
5368 KUHL ROAD ● ERIE, PENNSYLVANIA 16510 ● PHONE 814-899-4220 ● FAX 814-899-1410
Floor Stand Light Installation
GENERAL INFORMATION
A member of the Medical Illumination International Group
Section 3
Note: The VistOR PR
Light is shown.
Page 33 of 85