Table of Contents
Advertisement
VistOR SP and VistOR SPF Operation
• Fiber Optic Generator: If your spotlight includes an optional fiber optic generator, the light
output port and on/off switched are located as shown in figure 34. The light head has a turret
that allows a selection of output ports for a variety of common cable fittings. This multi-port
model will accept fiber optic cables with ACMI, OLYMPUS, STORZ, and WOLF plug fittings.
To operate the turret, rotate it in either direction to align it with the port opening.
NOTE: Make sure that all cables have been fully removed from the turret before
rotating it to a new position. To remove the fiber optic cable, grasp the plug at the end of
the cable and gently pull until it releases from the output port.
Use only the connector types shown. Other connectors may require an adapter.
Multiport Turret
FIGURE 34: VistOR SPF Spotlight Model Operation
5368 KUHL ROAD ● ERIE, PENNSYLVANIA 16510 ● PHONE 814-899-4220 ● FAX 814-899-1410
Sterilizable Handle
A member of the Medical Illumination International Group
Fiber Optic Lamp Switch
Front Lamp Switch
Section 4
P
age 50 of 85
Advertisement
Table of Contents
