ADTRAN Express L128 User Manual page 147

Isdn router/bridge
Table of Contents

Advertisement

Appendix B: Log Messages
Connected <number>
level 5
A call from or to <number> was connected. If no caller ID is available for the
ISDN line then <number> will be blank for incoming calls.
Demand calling '<user>'
level 4
A new call is being placed due to incoming packet routed to "idle" interface or
bridge packet passing through demand filter. The Connection List profile
used is the one with <user> in the description field.
DEST NOT ISDN
level 4
The number dialed is not ISDN. This is a warning and is most often seen for
POTS calls.
Dial <number>
level 5
The Express L128/L128T is dialing <number>.
Dialing ...
level 5
A phone on the Express L128/L128T POTS port is dialing.
Disconnect <number>
level 5
A call from or to <number> was disconnected. If no caller ID is available for
the ISDN line, then <number> will be blank for incoming calls.
Dump <number>
level 5
A call or call attempt to or from <number> has been refused. If no caller ID is
available for the ISDN line, then <number> will be blank for incoming calls.
Dump call
level 3
The Express L128/L128T has dropped an incoming call because it was busy
with calls.
130
Express L128/L128T User Manual
61202.070L1-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Express l128t

Table of Contents