Traps/Manager Name; Traps/Manager Ip; Management/Maint Port; Maint Port/Password Protect - ADTRAN Express L128 User Manual

Isdn router/bridge

Table of Contents

Chapter 3: Terminal Menu Operation and Structure

Traps/Manager Name

Write security: 2; Read security: 4

This is the text string describing the name of the entry. It is intended for easy

reference and has no bearing on the SNMP trap function.

Write security: 2; Read security: 4

This is the IP address of the manager that is to receive the traps.

The Express L128/L128T has an EIA-232 connector on the back of the unit.

The setup for that port is under this menu.

Write security: 0; Read security: 1

When set to No, the maintenance port is not password protected. When On

(def), the Express L128/L128T will prompt for a password upon startup.

Write security: 0; Read security: 1

This is the text string that is used for comparison when password protecting

the maintenance port. By default, no password is entered.

The security level for the maintenance port is always set to 0. This gives full access to

all menus.

Write security: 5; Read security: 5

This is the asynchronous rate that the maintenance port will run. The possible

values are 300, 1200, 2400, 4800, 9600 (def), 19200, 38400, 57600, 115200.

Write security: 5; Read security: 5

This is the asynchronous bit rate that the maintenance port will run. The pos-

sible values are 7 or 8 (def) bits.

Express L128/L128T User Manual

61202.070L1-1

Table of Contents

Express l128t