Table of Contents
Advertisement
Quick Startup Guide
When the computer which is attached to the local LAN attempts to access a
host on the access server, the Express L128/L128T will dial the number pro-
vided in the Connection List profile. The Express L128/L128T will provide
one of two B-channels based on traffic demand and POTS port usage (Express
XLT model only). If no packet traffic is transmitted or received for the speci-
fied number of seconds, the Express L128/L128T will disconnect the link until
a computer on the local LAN again attempts to access a host on the access serv-
er.
If Novell's IPX protocol is being used, the link must be dialed first in the Dial
menu to obtain the server and route information needed by the computer to
boot up. Advanced users can use the Express L128/L128T's Probe feature to
periodically dial the access server to obtain the route and server information,
thereby removing the need to manually dial the first time.
61202.070L1-1
Express L128/L128T User Manual
5
Advertisement
Table of Contents
