Table of Contents
Advertisement
Chapter 3: Terminal Menu Operation and Structure
NAT/DHCP Renewal Time
Write security: 3; Read security: 5
This is the number of hours that the DHCP server should allow the device be-
fore it is required to send a new DHCP request. The default is 15 hours, and 0
represents an infinite lease.
NAT/Web Server
Write security: 3; Read security: 5
This is the IP address of a web server on the Ethernet network. When an active
NAT connection is made to the Internet, any HTTP, FTP, or Mail server re-
quests from the WAN are translated and sent to this web server.
IP/DNS
The Domain Name Server parameters used by the Express L128/L128T are
specified here. The DNS server addresses can be exchanged between PPP
peers. When a connection occurs and IPCP is negotiated, the Express L128/
L128T will get the DNS server addresses from the PPP peer. If the configured
DNS server addresses (Server 1 and Server 2) are all zeros, the addresses from
the PPP peer are used. In NAT mode, the PPP peer's DNS addresses are al-
ways used. The DNS addresses set in Server 1 and Server 2 are offered to a PPP peer
if so requested.
DNS/Domain Name
Write security: 3; Read security: 5
This is a text string used to represent the domain name used by the Express
L128/L128T.
DNS/Server 1
Write security: 3; Read security: 5
This is the IP address for the primary DNS device. It is the first server that do-
main name requests are sent.
44
Express L128/L128T User Manual
61202.070L1-1
Advertisement
Table of Contents
