Konica Minolta REGIUS 190 Service Manual page 63

2.3 Insertion / Ejection Unit
•
Controlling parts comprising the ejection assy
3
Part Name
1 Eject Shutter Close
sensor (S20)
2 Back Plate Detect Sen-
sor (S21)
3 Eject Motor (M3)
36
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
2
Function Access to the Part
Detects the eject 1) Remove the insertion / ejection unit.
shutter close posi-
tion.
2) Remove the guide plate for eject sensor wiring.
3) Remove the eject sensor bracket.
4) Remove the sensor from the eject sensor bracket.
5) Unplug a connector.
Detects presence 1) Remove the insertion / ejection unit.
of the back plate
through actuator.
2) Remove the actuator bracket.
3) Remove the sensor from the actuator bracket.
4) Unplug a connector.
Drives the eject Refer to
rollers.
1
•Refer to "2.3.2 Removal of the Insertion/Ejection Unit,
•Refer to "2.3.8 Replacement of Ejection Motor (M3), p.45"
•Refer to "2.3.8 Replacement of Ejection Motor (M3),
•JP54
•Refer to "2.3.2 Removal of the Insertion/Ejection Unit,
•JP51
"2.3.8 Replacement of Ejection Motor (M3), p.45"
p.37".
p.45".
p.37".