5)
Click "Stepping motors" tab.
6)
Click [Insertion pos.] of "Transport Unit".
7)
Check that "Transport Unit Insertion Position ...OK" is
shown on "Information : " window.
8)
Click [Move to HP] of "Cassette receive Unit".
9)
Check that "Cassette receive Unit to HP ...OK" is
shown on "Information : " window.
Implementing the above procedures completes the series of operation starting from insertion through ejection. At
this stage, next cassette can be inserted. (READY Status)
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
3.4 Verification of Reading Operation
115