2.3 Insertion / Ejection Unit
2.3 Insertion / Ejection Unit
2.3.1
Controlling Parts of Insertion / Ejection Unit
•
Controlling parts in the area of insertion nip rollers
3
Part Name
1 Insertion Slot sen-
sor Receiver Side
(LPB1, LPB2)
2 Insertion Slot Sensor
Emission Side
(LLB1, LLB2)
3 Bar Code Reader
2
5
Function
Access to the Part
Detects the inserted
1) Remove the ejection guide assy.
cassette.
2) Remove the cassette stacker.
3) Remove the stay.
4) Remove the fixing screws (one for each sensor).
5) Unplug the connector (one for each sensor)
Emits light against 1.
1) Remove the insertion / ejection unit front cover.
2) Remove the fixing screws (one for each sensor).
3) Unplug the connector (one for each sensor)
Reads the bar code
Refer to
label
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
1
4
•Refer to
"2.3.3 Removal of Ejection Guide Assy, p.39"
•Refer
to"2.3.4 Replacement of Bar Code Reader,
•Refer to
"2.3.4 Replacement of Bar Code Reader,
•Left: JP57, Center: JP55
•Refer to
"2.2.4 Removal of Insertion / Ejection Front Cover,
p.31".
•Left: JP58, Center: JP56
"2.3.4 Replacement of Bar Code Reader,
p.40".
p.40".
p.40".
33