2.3 Insertion / Ejection Unit
2.3.6
Replacement of Insertion Motor
1.
Remove the insertion / ejection unit front cover.
Removal of Insertion / Ejection Front Cover, p.31"
2.
Remove three fixing screws, and remove the insertion
motor (M1).
3.
Detach the wire bundle from the wire clamp, and unplug a
connector.
•
JJ47
4.
Remove an E-ring, and remove the torque limiter.
5.
Carry out reassembly in the reverse order to that described
above.
("2.2.4
Fixing Screws (3pcs)
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
Connector
Wire Clamp
Insertion Motor (M1)
Torque Limitter
E-Ring
43