Table of Contents
Advertisement
8.5. V ision Startup Settings
The startup settings are a function that sets the startup conditions for when the power supply to the vision
sensor is switched On (select whether to start up online or offline and select the job to load).
This section explains the work for setting the startup using MELFA-Vision.
(1) Display the MELFA-Vision startup screen.
From the MELFA-Vision menu, click [Sensor] - [Startup] to display the "Startup" screen.
(2) Select whether to start up online or offline and what job to load when starting the vision sensor.
To start online, put a check in the [Online] checkbox. To start offline, remove the check from the
checkbox.
The jobs in the vision sensor are displayed in the [Job] drop-down list so select the job to load. If
there is no particular job to specify, select [<New>].
When the settings are complete, click the [OK] button.
The "Startup" screen is closed and display returns to the main screen.
8 Maintenance
Vision Startup Settings 8-84
Advertisement
Table of Contents
