Table of Contents
Advertisement
(4) This makes the settings for the robot controller and MELFA-Vision to communicate.
Click the "Communications server"
display the "Communication Server" screen. (If the communication parameters have not been set yet,
all the information is written in red.）
Click the [Setting] button to display the "Communication Setting" screen.
Click [Method], then select "TCP/IP".
Click the [Detail] button to display the "TCP/IP Communication Protcol" screen.
Vision])
Click the [OK] button to finalize the settings.
displayed on the Windows taskbar to
IP Address
: Robot controller IP address.
Robot Name
: Easy-to-understand name (Here, [For
7 Robot Controller Settings
Robot Controller Parameter Settings 7-54
Advertisement
Table of Contents
