Table of Contents
Advertisement
Trigger
Camera
Continuous
External
Manual
Network
(*1) For details on discrete I/O, see the "In-Sight Installation Guide" that comes with this system.
(4) The area in which work is detected, registration of work to search for, and the work position
output to the robot are set with the "Job Editing" screen [Pattern & Search Area] tab.
This specifies the image take-in trigger for when the vision
sensor is "online".
[Camera]
The image is taken in at the rising edge detected at the
camera hardware trigger input port.
[Continuous]
Images are taken in continuously.
[External]
The image is taken in at the rising edge of a discrete I/O (*1)
input bit or serial command.
[Manual]
The image is taken in when the <F5> key is pressed.
[Network]
The image is taken in when the trigger is input to the master
vision sensor on the network.
6 Vision Sensor Settings
Work recognition test 6-42
Advertisement
Table of Contents
