Table of Contents
Advertisement
8.2. V ision Sensor Data Restoration
The restore function takes the files backed up to the PC with the backup function and returns them to the
vision sensor.
The restored files are all the files that were backed up.
This function can be used with the vision sensor either logged on or logged off.
Also, although this function can be used with the specified vision sensor either Online or Offline, since the
robot and vision sensor access can be slowed down by file transfer operations, it is recommended to
restore with the vision sensor offline.
This section explains restoration work using MELFA-Vision.
(1) Display the MELFA-Vision restore screen.
From the MELFA-Vision menu, click [Sensor] - [Restore] to display the "Restore" screen.
(2) Specify the folder to transfer from.
The folder to transfer from can be changed with the [Browse] button.
Select the vision sensor to restore from the "Sensor List", then click the [Restore] button.
(3) If you select a vision sensor other than the one currently logged on to, the "User Name and
Password" screen is displayed, so input the user name and password for the vision sensor to be
restored, then click the [OK] button.
This screen is not displayed if the currently logged on vision sensor is selected with the "Sensor
List".
This screen is also not displayed if a sensor is selected that is not logged on but that can be logged
onto with the currently logged on user name and password.
8 Maintenance
Sensor List
Vision Sensor Data Restoration 8-78
Advertisement
Table of Contents
