6 Vision Sensor Settings
(5-3)This shows setting examples for the start angle and end angle.
◆When Start angle: –45˚, end angle: 45˚ is set
When you click the "Job Editing" screen [Test] button, only work is detected that is within the
±45˚ range with the registered work angle as 0˚.
◆When Start angle: –45˚, end angle: 180˚ is set
When you click the "Job Editing" screen [Test] button, only work is detected that is within the
range –45˚ to +180˚ with the registered work angle as 0˚.
6-49 Work recognition test