Mitsubishi MELFA 4D-2CG5100-PKG-E Instruction Manual page 5

■Preface
Thank you for purchasing this network vision sensor for CRn-500 series Mitsubishi Electric industrial robots.
The network vision sensor is an option that is used in combination with a CRn-500 series controller to make it
possible to detect and inspect work through visual recognition. Before using this sensor, please read this
manual well so that you utilize the contents of this manual when using this network vision sensor.
This manual attempts to cover special handling as well. Please interpret the absence of an operation from
this manual as meaning that it can not be done.
The contents of this manual target the following software versions.
Robot controller
■ Symbols & Notation Method in This Manual
DANGER
WARNING
CAUTION
No part of this manual may be reproduced by any means or in any form,without prior consent from
・
Mitsubishi.
The details of this manual are subject to change without notice.
・
An effort has been made to make full descriptions in this manual.However,if any discrepancies or
・
unclear points are found,please contact your dealer.
The information contained in this document has been written to be accurate as much as
・
possible.Please interpret that items not described in this document "cannot be perfomed.".
Please contact your nearest dealer if you find any doubtful,wrong or skipped point.
Microsoft, Windows, and .NET Framework are registered trademarks of the Microsoft Corporation of
・
the United States in the United States and/or other countries.
In-Sight is registered trademark of the Cognex Corporation.
・
Adobe,the Adobe logo,Acrobat,and the Acrobat logo are trademarks of Adobe Systems incorporated.
・
Reference to registered trademarks and trademarks are omitted in this manual.
・
Copyright(C) 2006 MITSUBISHI ELECTRIC CORPORATION ALL RIGHTS RESERVED
: Ver. K6 or later
This indicates a situation in which a mistake in handling will expose the
user to the danger of death or severe injury.
This indicates a situation in which a mistake in handling has the
possibility of resulting in death or severe injury of the user.
This indicates a situation in which a mistake in handling has the danger of
causing injury to the user. Equipment damage is also possible.