Table of Contents
Advertisement
9 Detailed Explanation of Functions
9.2.4. Vision sensor network settings
The vision sensor network settings can be changed. From the MELFA-Vision menu, click [Sensor] –
[Connection] – [Communication Setting] to display the "Network Settings" screen. Check with your network
administrator for the items to set.
Setting item
Host Name
Use DHCP Server
IP Address
Subnet Mask
Default Gateway
DNS Server
Domain Name
DHCP Timeout
Transition to Time Out
Auto Delete
9-115 MELFA-Vision Function Details
Figure 9-4 MELFA-Vision "Network Settings" Screen
Table 9-6 "Network Settings" Screen Setting Items List
Changes the vision sensor name.
Check this when using the DHCP server to allocate the IP address.
Input the IP address.
Defines which part of the IP address shows the network and which part shows
the host.
Data can be relayed between hosts on different networks by specifying the
gateway address.
Input the network host IP that supplies the DNS resolution (converting from
host name to IP address).
Defines the domain name of the network the vision sensor is on.
Specifies the DHCP server response wait time.
Shifts to another connection without closing the connection.
Closes the connection.
Explanation
Advertisement
Table of Contents
