Hisense HMD3G21S User Manual page 22

Table of Contents

Advertisement

Operational Instructions and Function Adjustment
Procedure:
1) Press the
button on the LCD monitor to go to the
User menu.
2) Press ▲/▼ to select the
the Calibration Settings menu on the right.
3) Press ▲/▼ to select the item to be adjusted, and press
to confirm the selection and go to the next menu.
4) In each menu, press ▲/▼ to select an option.
5) Press
to return to the previous menu.
Auto Calibration and Auto Validation
Auto Calibration: Select this option to automatically measure the gray scale brightness, generate
DICOM data, and record results.
Auto Validation: Select this option to validate the compliance of the current DICOM data and
record results.
* After the LCD monitor has been used for a time, its display characteristics may change. You can
perform automatic validation. If it fails, perform automatic calibration to generate DICOM data
again.
Suboption Function
Select Yes to perform automatic validation or calibration, during which a progress bar is
displayed. The prompt "Press j to cancel" is displayed below the progress bar. If you press
Yes
j, the screen disappears, and the result is "Canceled".
After the validation or calibration is completed, the result (Pass or Fail) is recorded in the
Result column.
Select this option to view the results of the last five calibrations or validations. The results
Result
include Pass, Fail, Canceled, and Error. The system use duration at the time of calibration
or validation is recorded.
Note
To cancel automatic calibration, press j and select Cancel.
If you select automatic calibration or validation within less than 20 minutes after the LCD monitor
is powered on, the message "Power-on in progress" appears. It is recommended that automatic
calibration or validation be performed about 30 minutes after power-on when the LCD monitor is
in the optimal state.
During automatic calibration or validation, avoid excessive ambient light.
icon. Press
to go to
18
User menu
Auto Calibration
Auto Validation
User menu
Power Saving manager

Advertisement

Table of Contents
loading

Table of Contents