Swath Rollers Cog Gear - SaMASZ KDD 861 Operator's Manual

Tab. 13. Oil capacities in intersecting axis gears
Model
KDD 861 (H)
KDD 911 (H)
KDD 912 (H)
KDD 941 (H)
KDD 861 S/SL/W (H)
KDD 941 S/SL/W (H)
KDD 861 S/SL/W T (H)
KDD 941 S/SL/W T (H)
WARNING!
The above instructions should be strictly followed. If the discs in the cutterbar
rotate loosely, do not worry about high intersecting axis gear temperature; after
long working time it may reach even 100

Swath rollers cog gear

Before checking the oil level in swath rollers cog gear unscrew bolts holding protective housing.
Please check the oil level and, if needed, please refill after having removed the vent A on the top of the
gearbox (Fig. 53) The oil level can be checked through the check opening B on the side of the gear.
Please refill the oil until it is visible in the check opening B. The oil level: about 0.5 L
(0.13 US gal lqd). Check oil level when the cutterbar is on the ground. Removing the worked oil from
the gearbox is done through the outlet C.
Tab. 14. Oil capacities in swath rollers cog gear
Model
KDD 861 W (T)(H)
KDD 941 W (T)(H)
64
KDD
Type of gear
054-02.10CB.R
055-02-10CB.R
118-03.111.LS
130-01.113.LS
052-02.0100AB.L
095-07.1FL.RS
138-03.1D13.LS
052-02.0100AB.L
053-02.0100AB.L
095-07.1FL.RS
Oil capacity
[L (US gal lqd)]
~ 0.5 (0.13)
DOUBLE-SIDED MOWER
Oil capacity
Oil type
[L (US gal lqd)]
1.2 (0.32)
2.6 (0.69)
6.0 (1.6)
2.5 (0.66)
SAE 80W/90,
API GL-4
1.2 (0.32)
6.0 (1.6)
2.5 (0.66)
1.2 (0.32)
o C.
Oil type
After first 50 h of operation, then after
80W90
next 500 h (or at least once a year)
OPERATOR'S MANUAL
Lubrication frequency
After first 50 h of
operation, then after
next 500 h (or at least
once a year)
Lubrication frequency