Tm-2/Im-2 Series Codification; Series Codification - Hiwin TM-2 Series Installation Manual

MW99UE01-2104
Torque Motor Installation Manual

2.2.2 TM-2/IM-2 Series codification

Type :
TM-2: Torque motor
IM-2 : IM motor
External diameter of the stator:
1 : Ø 160mm
2 : Ø 198mm
4 : Ø 230mm
7 : Ø 310mm
A : Ø 385mm
D : Ø 485mm
G : Ø 565mm
Rotor (Magnet) height:
3 :30mm
5 :50mm
7 :70mm
A :100mm
F :150mm
Torque / Speed Characteristics Code
See motor datasheet
Temperature sensor configuration:
0 :PTC130+PTC100+Pt1000 (Standard)
1 :PTC130+PTC100+Pt1000x3
⋮
Cable length:
20 : 2.0m (Standard)
05 : 0.5m
10 : 1.0m
⋮
1)
Cable output style :
S :Straight output
V :Straight output with cable clamp
A :Straight output with cable gland
H :90° output in tangent direction with cable clamp (temp. cable straight output)
P :All cable separate with cable clamp (straight output)
⋮
Reserved:
00 :Standard(without bridge)
03 :Bridge on cable side
⋮
1). Cable output style schematics refer to Figure 2.2
2-4
Motor specification
TM - 2 - 7 5
Sensor
- S D 0 - 0
Basic Structure of Motor
Cable output Reserved
- 20 V - X
HIWIN MIKROSYSTEM Corp.
X