Operation; Video-In-Motion Function; Selecting The C.logic As Current Av-Source - Caraudio-Systems c.LOGiC C2-MMI2G Series Manual

4. Operation

4.1.

Video-in-motion function

The video-in-motion function for the fed in video-signal is activated permanently without
disturbing the navigation performance.
4.2.

Selecting the c.LOGiC as current AV-source

After installation the c.LOGiC is identified as factory CD-changer
and is displayed as virtual (second) CD-changer in the "CD/TV"
and accordingly the "MEDIA" (in vehicles from year 2007) menu,
sub-menu "Changer" and is shown as "CD7 – VIDEO".
Select "CD7 – VIDEO" by pressing the knob. The display shows
"01 – ON: - >" and "02- OFF: - <". The MMI switches to the first
activated input by pressing the ">" button. Each press of the ">"
button will switch to the next enabled input.
Disabled inputs will be skipped. If all inputs are enabled the
order is:

Factory video RGB-in
Pressing the "<" button will return to the factory video mode of the MMI navigation.
Note: Please note that no repeat function is activated in the
Setup CD mode, otherwise it may get error messages.
Version 19.10.2012
  
AV-IN1 AV-IN2

Factory video ...
C2-MMi2G-x