Table of Contents
Advertisement
Quick Links
Compatible with BMW E65 Professional
with old iDrive (E65) and menu button,
without factory rear-seat entertainment
Product features
• Full plug and play multimedia interface
• 2 AV-inputs with separate IR-control channels
• control of after-market devices, e.g. DVB-T tuner, DVD-player, DVD-changer, ...
• after-market rear-view camera input
• automatic switching to after-market rear-view camera input (only from interface mode)
• rear-view camera power (+12V max 1A)
• Rear-seat-entertainment video-output for Video-sources connected to the c.LOGiC
• power-on remote-out trigger-signal (+12V max 1A) to switch on connected devices
• video-in-motion
Version 20.09.2017
c.LOGiC-Interface
C2-E65-TV
navigation systems
Vehicles with factory TV-tuner port
(Factory TV-tuner must be uninstalled)
C2-E65-TV
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Caraudio-Systems c.LOGiC C2-E65-TV
Summary of Contents for Caraudio-Systems c.LOGiC C2-E65-TV
- Page 1 c.LOGiC-Interface C2-E65-TV Compatible with BMW E65 Professional navigation systems with old iDrive (E65) and menu button, without factory rear-seat entertainment Vehicles with factory TV-tuner port (Factory TV-tuner must be uninstalled) Product features • Full plug and play multimedia interface • 2 AV-inputs with separate IR-control channels • control of after-market devices, e.g. DVB-T tuner, DVD-player, DVD-changer, … • after-market rear-view camera input • automatic switching to after-market rear-view camera input (only from interface mode) • rear-view camera power (+12V max 1A) • Rear-seat-entertainment video-output for Video-sources connected to the c.LOGiC • power-on remote-out trigger-signal (+12V max 1A) to switch on connected devices • video-in-motion Version 20.09.2017 C2-E65-TV...
-
Page 2: Table Of Contents
Contents 1. Prior to Installation 1.1. Delivery contents 1.2. Check compatibility of vehicle and accessories 1.3. Setting the dip switches of the CAN-box TV-436 1.4. Setting the dip switches of the MOST®-box C2C-M336 1.4.1. Automatic switching to rear-view camera 1.4.2. Deactivating c.LOGiC AV2-input 2. Installation 2.1. Installation of CAN-box TV-436 2.2. Installation of MOST®-box C2C-M336 2.3. Connecting peripheral devices 2.3.1. AV-source(s) 2.3.2. Installing AV-source’s IR-sensor additionally 2.3.3. After-market rear-view camera and rear-seat-entertainment 2.3.4. Factory nightvision, factory DVD-changer, factory rear-view camera 3. Operation 3.1. Activation of the video-in-motion function 3.2. -
Page 3: Prior To Installation
Legal Information By law, watching moving pictures while driving is prohibited, the driver must not be distracted. We do not accept any liability for material damage or personal injury resulting, directly or indirectly, from installation or operation of this product. This product should only be used while standing or to display fixed menus or rear-view-camera video when the vehicle is moving, for example the MP3 menu for DVD upgrades. Changes/updates of the vehicle’s software can cause malfunctions of the interface. We offer free software-updates for our interfaces for one year after purchase. To receive a free update, the interface must be sent in at own cost. Labor cost for and other expenses involved with the software-updates will not be refunded. 1. Prior to installation Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation must be free of moisture and away from heat sources. 1.1. Delivery contents Take down the SW-version and HW-version of the interface boxes, and store this manual for support purposes. Harness TV-BM65 Harness C2C-IR MOST®-box C2C-M336 HW_____ SW_____ CAN-box TV-436 HW_____ SW _____ Harness C2C-BM01 If remote function for the connected devices shall be used, additional an IR- Remote cable and Y-adapter are needed, see chapter AV-source(s). Version 20.09.2017 C2-E65-TV... -
Page 4: Check Compatibility Of Vehicle And Accessories
1.2. Check compatibility of vehicle and accessories Requirements Vehicle 7series (E65/E66) Navigation Navigation system Professional E65 with old iDrive and menu button, without factory rear-seat entertainment Vehicles with factory TV-tuner port Limitations factory-TV-tuner Must NOT be installed. If uninstalled, optical ring must be closed. factory DVD-changer After-market rear-view camera cannot be connected to or factory nightvision the c.LOGiC interface. After-market rear-view cam Only works from c.LOGiC mode, not from OEM. 1.3. Setting the dip switches of the CAN-box TV-436 Alle vehicles dip 1 ON, dip 2 OFF, dip 3 OFF 1.4. Setting the dip switches of the MOST®-box C2C-M336 The default dip switch settings of the MOST®-box need to be changed ONLY if a rear-view camera is or shall be connected or if the AV2 of the c.LOGiC shall be deactivated. The dip switches are located inside the MOST®-box . For changes it is necessary to open the box. Default settings are: dip1 = ON, dip2 = OFF, dip3 = OFF Version 20.09.2017 C2-E65-TV... -
Page 5: Automatic Switching To Rear-View Camera
1.4.1. Automatic switching to rear-view camera dip switches If an after-market rear-view camera shall be connected or a factory of MOST®-box rear-view camera is connected, in order for the c.LOGiC to automatically switch to its camera input, when reverse is engaged set dip2 = ON (up). Note: Automatic switching works only from c.LOGiC mode. 1.4.2. Deactivating c.LOGiC AV2-input If omly one AV-source shall be connected to the c.LOGiC, we recommend to disable the AV2-input, to avoid customers switching by mistake to black/no picture of the AV2-input. In order to disable the AV2-input of the c.LOGiC, set dip1 = OFF (down). 2. Installation Switch off ignition and disconnect the vehicle’s battery! If according to factory rules disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle in sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a resistor lead. Complete and correct function of the c.LOGiC is possible only when CAN and MOST® (tuner) connections are made properly. On vehicles without TV-icon, it will be coded automatically after installation. Place of installation is at the rear of the navigation screen and at the rear of the navigation computer. Note: The loose white and green cable of harness TV-BM65 are not required and must be isolated. Version 20.09.2017 C2-E65-TV... -
Page 6: Installation Of Can-Box Tv-436
2.1. Installation of CAN-box TV-436 The CAN interface is connected to the backside of the OEM screen. Remove 3 TORX screws at the OEM screen. Remove cover grill (only plugged). Place soft towel beneath the navigation monitor to avoid scratches Flip down the board monitor. NOTE: The OEM screen gets stuck with its connector at the upper side of the cockpit. Insert a hard plastic sheet like a credit card to prevent cockpit from taking damage. Remove the black connector at the backside of the screen as shown below. Version 20.09.2017 C2-E65-TV... - Page 7 Remove 12-pin insert from black vehicle harness connector. Insert 12-pin insert into black connector of the CAN interface harness TV-BM65. Insert the completed black connector into CAN interface harness TV-BM65. Connect 12-pin insert from CAN interface harness TV-BM65 into black connector from vehicle harness. Insert completed connector into the plug on the backside of the navigation monitor. Connect 8pin Molex connector of TV-BM65 to CAN-box TV-436. NOTE: Pictures do NOT show the fibre optics connected in car! Version 20.09.2017 C2-E65-TV...
-
Page 8: Installation Of Most®-Box C2C-M336
2.2. Installation of MOST®-box C2C-M336 The fibre optical interface installation is made at the navigation computer, which is located at the left side in the trunk behind a cover and has to be removed. The factory TV-tuner must be uninstalled. Remove the factory optical leads of the factory TV-tuner port (blue female connector) and connect it to the black male MOST®-connector enclosed to harness C2C-BM01. Pay attention to the directional arrow on the optical lead connectors. Connect the black male MOST®-connector to the female MOST®-connector on the rear of the MOST®-box C2C-M336 (OPTICAL). Connect the blue male connector of harness C2C-BM01 to the factory TV-tuner port Picture exemplary (blue female connector). Version 20.09.2017 C2-E65-TV... -
Page 9: Connecting Peripheral Devices
2.3. Connecting peripheral devices It is possible to connect up to 2 after-market AV-sources, after-market rear-view camera and rear-seat-entertainment to the c.LOGiC Interface. Also factory nightvision, factory DVD- changer or factory rear-view camera must be connected to the c.LOGiC Interface. Before final installation of the peripheral devices, we recommend to test-run the c.LOGiC functions to detect incompatibility of vehicle, navigation, factory accessories or peripheral devices as soon as possible. Version 20.09.2017 C2-E65-TV... -
Page 10: Av-Source(S)
2.3.1. AV-source(s) The c.LOGiC interface has the possibility to connect and remotely control by navigation buttons up to 2 pre-programmed devices. The device list in the device control table shows the pre-programmed remote channels and the related IR-remote cables STA-xxx which must be ordered separately for the control of the device. Using the respective STA-xxx IR-control cable(s), interconnect the blue (yellow) female 3pin AMP connector of harness C2C-IR and the IR-port of AV-source 1 (AV- source 2). Using RCA cable(s), interconnect the female RCA port AV1(AV2) of the MOST®-box C2C-M336 with the AV-output of the AV-source 1 (AV-source 2). The pink ACC-output wire (+12V max 1A) of harness C3C-BMW0x can be connected to the ACC-input wires of the connected device to switch it on. It carries +12V when the navigation computer is running. Version 20.09.2017 C2-E65-TV... -
Page 11: Installing Av-Source's Ir-Sensor Additionally
2.3.2. Installing AV-source’s IR-sensor additionally Additionally to the control via OEM navigation, it is possible to install the original IR-sensor of a connected device. By using the respective Y-adapter (e.g. STA-Y35MM or STA-RJ12) for the IR-Port of the connected device, the controls of navigation AND device’s IR-sensor can be connected and used simultaneously. Installation of the IR-sensor is recommended as the controls via navigation are limited, and not all functions may be covered. 2.3.3. After-market rear-view camera and rear-seat-entertainment Using RCA-cables, connect the rear-seat-entertainment to the female RCA-connector VIDEO OUT of MOST®-box C2C-M336. Note: As the output is a full output, not shared with the video signal for the navigation system, splitting the video with an RCA Y-cable might give a good enough picture for two rear-seat-entertainment monitors. If not, or if connecting more than two monitors, use a video splitter. Connect the video RCA of the after-market rear-view camera to thethe female RCA connector R-CAM IN of MOST®-box C2C-M336. The green wire of harness C2C- BMW02 can be used as +12V power (max 1A) supply for the rear-view camera. Note: Automatic switching to the camera-input when reverse gear is engaged works only in c.LOGiC mode. Version 20.09.2017 C2-E65-TV... -
Page 12: Factory Nightvision, Factory Dvd-Changer, Factory Rear-View Camera
2.3.4. Factory nightvision, factory DVD-changer, factory rear-view camera On vehicles with factory nightvision, factory DVD-changer or factory rear-view camera, pin out the video-signal and video-signal ground from the white 18pin AMP connector of the vehicles harness (rear of navigation computer) and connect them by male RCA-connector to the R-CAM IN of tuner-box. Navi Video-signal Video-signal ground E65 Pin 1 (yellow-black) Pin 10 (green) The factory component will work as before. 3. Operation 3.1. Activation of the video-in-motion function Tthe video-in-motion function is permanently active without disturbing the navigation performance. 3.2. Selecting the c.LOGiC as current AV-source In the vehicle’s main menu, select Infotainment and then TV by iDrive to choose the c.LOGiC as current AV-source. 3.3. Assigning device controls After selecting the c.LOGiC as current AV source, push iDrive knob to open the c.LOGiC control menu. Select control levels setup “DEV1: RCxx” (“DEV2:RCxx”) and assign related IR-code for AV1 (AV2) as described in device control table. Note: The IR-control channel DEVV1 is preset to RC-Code 41 compatible DVB-T tuners and DEV2 is preset to RC-Code 09 for the usbLiNK. If the AV2 is deactivated (see chapter Deactivating c.LOGiC AV2-input), the menu items “USE DEV2” and “DEV2: RCxx” will not be available. Version 20.09.2017 C2-E65-TV... -
Page 13: Switching To Av1, Av2 Or After-Market Rear-View Camera
3.4. Switching to AV1, AV2 or after-market rear-view camera In the c.LOGiC control menu, choose USE DEV1 to enter AV1, USE DEV2 to enter AV2 (not available if AV2 is deactivated, see chapter Deactivating c.LOGiC AV2-input) or REAR CAM to switch to the c.LOGiC after-market rear-view camera-input (even if the automatic switching to the camera input is disabled, see chapter Automatic switching to rear-view camera). After selection the menu will close automatically and switch to the selected source. The iDrive knob, some multi-function-steering wheel buttons (MFSW) and some navigation buttons (HU) are now available for remote functions (see assignment table for iDrive below). By pressing the iDrive-MENU-button, the system returns to the factory iDrive functions. By pressing the iDrive knob again, the c.LOGiC control menu will be re-entered. Version 20.09.2017 C2-E65-TV... -
Page 14: Button Assignment Table Idrive
3.5. Button assignment table iDrive The button assignment table shows which functions of the connected devices can be executed by iDrive. Once an AV-input is activated the iDrive action in the left column will execute the function described in the corresponding device column. The function description equals the remote control buttons of the device’s remote control. On the additional device the writing on the remote control buttons may vary (e.g. AV instead of Source). iDrive Aktion Gerät DVD DVC DVB-T iPod MENU long Setup Setup Setup Setup MENU short Return to factory Return to factory iDrive Return to factory Return to factory iDrive functions iDrive functions functions iDrive functions OPTIONS long *2 Audio Audio Info KCE: Light Bulb, Vlink: Subtitle OPTIONS short *2 Subtitle Subtitle Signal strength KCE: lower vol, Vlink: Display ENTER long STOP STOP EXIT ENTER short Power Power... -
Page 15: Specifications
4. Specifications Operation voltage 10.5 – 14.8V DC Stand-by power drain <1mA Operation power drain 210mA Power consumption 2.9W Temperature range -30°C to +80°C Weight 202g Measurements (box only) B x H x T 90 x 30 x 105 mm 5. Technical Support Caraudio-Systems Vertriebs GmbH manufacturer/distribution In den Fuchslöchern 3 D-67240 Bobenheim-Roxheim email support@caraudio-systems.de Legal disclaimer: Mentioned company and trademarks, as well as product names/codes are registered trademarks ® of their corresponding legal owners. Version 20.09.2017 C2-E65-TV...
Need help?
Do you have a question about the c.LOGiC C2-E65-TV and is the answer not in the manual?
Questions and answers