Preparing For Installation; Safety Recommendations; Safety Symbols; General Safety Recommendations - H3C SecPath F100-C-A-W Installation Manual

Preparing for installation

The H3C SecPath F100-C-A-W firewall series include the following models:
•
F100-C-A3-W
•
F100-C-A5-W
•
F100-C-A6-WL

Safety recommendations

To avoid any equipment damage or bodily injury, read the following safety recommendations before
installation. Note that the recommendations do not cover every possible hazardous condition.

Safety symbols

When reading this document, note the following symbols:
WARNING means an alert that calls attention to important information that if not understood or
followed can result in personal injury.
CAUTION means an alert that calls attention to important information that if not understood or
followed can result in data loss, data corruption, or damage to hardware or software.

General safety recommendations

•
Make sure the installation position is flat, vibration-free, and away from electromagnetic
interferences. ESD and anti-slip measures are in place.
•
Do not place the firewall on an unstable case or desk. The firewall might be severely damaged
in case of a fall.
•
Keep the chassis and installation tools away from walk areas.
•
Keep the chassis clean and dust-free.
•
Do not place the firewall near water or in a damp environment. Prevent water or moisture from
entering the firewall chassis.
•
Pay attention to the safety symbols on the package and handle the device accordingly.
Figure1-1 Packing symbols
Symbol Description
The devices shall not be vertically stacked beyond the specified
number.
Place the device with the arrows up.
The device is fragile. Handle it with care.
1