Logging In To The Firewall - H3C SecPath F100-C-A-W Installation Manual

Press Ctrl+D to access BASIC-BOOTWARE MENU...
Press Ctrl+T to start heavy memory test.
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing...Done.
****************************************************************************
*
*
*
****************************************************************************
Copyright (c) 2004-2018 New H3C Technologies Co., Ltd.
Compiled Date
Memory Type
Memory Size
Memory Speed
Flash Size
Nandflash Size
PCB Version
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Loading the main image files...
Loading file flash:/f1010fww-cmw710-system-E9524P11.bin......................
............................................................................
............................Done.
Loading file flash:/f1010fww-cmw710-boot-E9524P11.bin..........Done.
Image file flash:/f1010fww-cmw710-boot-E9524P11.bin is self-decompressing....
.Done.
System image is starting...
Cryptographic algorithms tests passed.
Line con0 is available.
Press ENTER to get started.
Press Enter to access user view of the firewall.
NOTE:
To access the EXTENDED-BOOTWARE menu, press Ctrl+B within four seconds at the
prompt "Press Ctrl+B to access EXTENDED-BOOTWARE MENU." If you do not press
Ctrl+B at the prompt, the system starts to read and decompress program files. To enter the
EXTENDED-BOOT menu afterwards, you need to reboot the device.

Logging in to the firewall

You can use the following methods to access and manage the firewall. For more information about
logging in to the firewall, see the configuration guides and command references for the firewall.
H3C SecPath BootWare, Version 1.03
: Aug 10 2018
: DDR3 SDRAM
: 2048MB
: 667MHz
: 16MB
: 256MB
: Ver.A
19
*
*
*