Installing The Firewall - H3C SecPath F100-C-A-W Installation Manual

Installing the firewall

WARNING!
Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to open
the chassis, contact H3C for permission. Otherwise, H3C shall not be liable for any consequence.
The installation procedure is the same for the H3C SecPath F100-C-A-W series firewalls. This
document uses the F100-C-A6-WL firewall as an example.
Figure1-3 Firewall installation flow
Mount the firewall on
a workbench
Start
Determine the
installation position
Mount the firewall on a
wall
Ground the firewall
Install optional components
Install Wi-Fi antennas
Install 4G antennas
Connect Ethernet cables
Connect the power cord
Verify the installation
End
8
Mount the firewall in
a 19-inch rack